View TLP4206G07_4124905.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP4206G
TOSHIBA Photocoupler Photorelay
TLP4206G
PBX Telecommunication ModemFAX Cards, Modems In PC Measurement Instrumentation
The TOSHIBA TLP4206G consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a SOP, which is suitable for surface mount assembly. The TLP4206GA is a 2-Form-A switch, which is suitable for replacement of mechanical relays in many applications. * * * * * * * 8 pin SOP (2.54SOP8): 2.1 mm high, 2.54 mm pitch 2-form-B Peak off-state voltage: 350 V (min) Trigger LED current: 3 mA (max) On-state current: 120 mA (max) On-state resistance: 25 (max) Isolation voltage: 1500 Vrms (min) JEDEC 11-10H1 Unit: mm
Pin Configuration (top view)
JEITA TOSHIBA
1
8
1, 3 : ANODE 2, 4 : CATHODE 5 6 7 8 : DRAIN D1 : DRAIN D2 : DRAIN D3 : DRAIN D4
Weight: 0.2 g (typ.)
2
7
3
6
4
5
1
2007-10-01
TLP4206G
Absolute Maximum Ratings (Ta = 25C)
Characteristics Forward current Forward current derating (Ta > 25C) = LED Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage Detector On-state current On-state current derating (Ta > 25C) = Junction temperature Operating temperature range Storage temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min, R.H. < 60%) = (Note 1) Symbol IF IF/C IFP VR Tj VOFF ION ION/C Tj Topr Tstg Tsol BVS Rating 50 -0.5 1 5 125 350 120 -1.2 125 -40 to 85 -55 to 125 260 1500 Unit mA mA/C A V C V mA mA/C C C C C Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device: LED side pins shorted together, and DETECTOR side pins shorted together.
Recommended Operating Conditions
Characteristics Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min 5 -20 Typ. Max 280 25 120 65 Unit V mA mA C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document.
Individual Electrical Characteristics (Ta = 25C)
Characteristics Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 350 V, IF = 5 mA V = 0, f = 1 MHz, IF = 5 mA Min 1.0 Typ. 1.15 30 65 Max 1.3 10 1 Unit V A pF A pF
2
2007-10-01
TLP4206G
Coupled Electrical Characteristics (Ta = 25C)
Characteristics Trigger LED current Return LED current On-state resistance Symbol IFC IFT RON Test Condition IOFF = 10 A ION = 120 mA ION = 120 mA Min 0.1 Typ. 1 15 Max 3 25 Unit mA mA
Isolation Characteristics (Ta = 25C)
Characteristics Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V, R.H. < 60% = AC, 1 min Isolation voltage BVS AC, 1 s, in oil DC, 1 min, in oil Min 5 x 10
10
Typ. 0.8 10
14
Max
Unit pF Vrms Vdc
1500
3000 3000
Switching Characteristics (Ta = 25C)
Characteristics Turn-on time Turn-off time Symbol tON tOFF Test Condition RL = 200 VDD = 20 V, IF = 5 mA (Note 2) Min Typ. Max 1 3 Unit ms ms
Note 2: Switching time test circuit
IF VDD IF VOUT 2, 4 5, 7 VOUT 10% tON 90% tOFF
1, 3
6, 8
RL
3
2007-10-01
TLP4206G
IF - Ta
100 280 240
ION - Ta
IF (mA)
(mA) On-state current ION
0 20 40 60 80 100 120
80
200 160 120 80 40
Allowable forward current
60
40
20
0 -20
0 -20
0
20
40
60
80
100
120
Ambient temperature Ta (C)
Ambient temperature Ta (C)
IF - V F
100 50 Ta = 25C 200 Ta = 25C
ION - VON
(mA)
(mA) On-state current ION
30
100
10 5 3
Forward current IF
0
1 0.5 0.3
-100
0.1 0.6
0.8
1
1.2
1.4
1.6
1.8
-200 -2
-1
0
1
2
Forward voltage VF
(V)
On-state voltage VON
(V)
RON - Ta
20 ION = 120 mA 5 ION = 120 mA
IFC - Ta
Trigger LED current IFC (mA)
On-state resistance RON ()
t < 1s 15
4
3
10
2
5
1
0 -20
0
20
40
60
80
100
0 -40
-20
0
20
40
60
80
100
Ambient temperature Ta (C)
Ambient temperature Ta (C)
4
2007-10-01
TLP4206G
tON, tOFF - IF
2000 Ta = 25C VDD = 20 V, RL = 200 tOFF 500 300 tON 100 50 30 1200
tON, tOFF - Ta
VDD = 20 V, RL = 200 IF = 5 mA tOFF
(s)
Switching time tON, tOFF
Switching time tON, tOFF
(s)
1000
1000
800
600
400
200
tON
1
3
5
10
30
50
100
Input current
IF (mA)
0 -40
-20
0
20
40
60
80
100
Ambient temperature Ta (C)
IOFF - Ta
1000 VOFF = 350 V IF = 5 mA
(nA) Off-state current IOFF
100 10 1 0
20
40
60
80
100
Ambient temperature Ta (C)
5
2007-10-01
TLP4206G
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
6
2007-10-01

▲Up To Search▲

Price & Availability of TLP4206G07

	To Download TLP4206G07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .